Compression Fittings

Model No: TA-NKP12

Material: Brass

Size: 1/2″ 

Description

BRASS PILLAR COCK CHUCK NUT – 1/2″ is normally used to secure basin taps/ kitchen taps to the bathroom fittings below your sinks. it is a viable replacement solution for damaged chock nut on the existing tap.

Model No: DZR-015A

Input / Output type: MI x FI

Material: Dezincification Resistant (DR) Brass

Size: 3/4″ x 1/2″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS BUSH (MI X FI) – 3/4″ x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-018A

Input type: FI 

Material: Dezincification Resistant (DR) Brass

Size: 1/2″ 

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS FEMALE END CAP- 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-019A

Input type: MI 

Material: Dezincification Resistant (DR) Brass

Size: 1/2″ 

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS MALE PLUG – 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-014A

Input / Output type: MI x MI

Material: Dezincification Resistant (DR) Brass

Size: 3/4″ x 1/2″

Other Size: 3/4″ x 3/4″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS NIPPLE (MI X MI) – 3/4″ x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-014B

Input / Output type: MI x MI

Material: Dezincification Resistant (DR) Brass

Size: 3/4″ x 3/4″

Other Size: 3/4″ x 1/2″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS NIPPLE (MI X MI) – 3/4″ x 3/4″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-016A

Input / Output type: FI x FI

Material: Dezincification Resistant (DR) Brass

Size: 1/2″ x 1/2″

Other Size Available: 3/4″ x 3/4″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS STRAIGHT COUPLER (FI X FI) – 1/2″ x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-016B

Input / Output type: FI x FI

Material: Dezincification Resistant (DR) Brass

Size: 3/4″ x 3/4″

Other Size Available: 1/2″ x 1/2″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS STRAIGHT COUPLER (FI X FI) – 3/4″ x 3/4″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-001A

Input / Output type: C x C

Size: 15mm x 15 mm

Material: Dezincification Resistant (DR) Brass

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS STRAIGHT COUPLER (C X C) – 15mm x 15mm is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-002A

Input / Output type: C x MI

Size: 15mm x 1/2″

Material: Dezincification Resistant (DR) Brass

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS STRAIGHT COUPLER (C X MI) – 15mm x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-003A

Input / Output type: C x FI

Size: 15mm x 1/2″

Material: Dezincification Resistant (DR) Brass

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS STRAIGHT COUPLER (C X FI) – 15mm x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-004A

Input / Output type: C x C

Material: Dezincification Resistant (DR) Brass

Size: 15mm x 15mm

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS ELBOW (C X C) – 15mm x 15mm is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-005A

Input / Output type: C x MI

Material: Dezincification Resistant (DR) Brass

Size: 15mm x 1/2″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS ELBOW (C X MI) – 15mm x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-006A

Input / Output type: C x FI

Material: Dezincification Resistant (DR) Brass

Size: 15mm x 1/2″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS ELBOW (C X FI) – 15mm x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-021A

Input / Output type: FI x FI

Material: Dezincification Resistant (DR) Brass

Size: 1/2″ x 1/2″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS ELBOW (FI X FI) – 1/2″ x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-009A

Input / Output type: C x C x C

Material: Dezincification Resistant (DR) Brass

Size: 15mm x 15mm x 15mm

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS T-ELBOW (C X C X C) – 15mm x 15mm x 15mm is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-010A

Input / Output type: C x C x MI

Material: Dezincification Resistant (DR) Brass

Size: 15mm x 15mm x 1/2″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS T-ELBOW (C X C X MI) – 15mm x 15mm x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-011A

Input / Output type: C x C x FI

Material: Dezincification Resistant (DR) Brass

Size: 15mm x 15mm x 1/2″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS T-ELBOW (C X C X FI) – 15mm x 15mm x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-012A

Input / Output type: C x FI x C

Material: Dezincification Resistant (DR) Brass

Size: 15mm x  1/2″ x 15mm

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS T-ELBOW (C X FI X C) – 15mm x 1/2″ x 15mm is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-020A

Input / Output type: FI x FI x FI

Material: Dezincification Resistant (DR) Brass

Size: 1/2″ x 1/2″ x 1/2″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS T-ELBOW (FI X FI X FI) – 1/2″ x 1/2″ x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution.

Model No: DZR-007A

Input / Output type: C x FI

Material: Dezincification Resistant (DR) Brass

Size: 15mm x 1/2″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS WALLPLATE ELBOW (C X FI) – 15mm x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution. Comes with a built-in Wall plate for attaching onto walls.

Model No: DZR-013A

Input / Output type: C x C x FI

Material: Dezincification Resistant (DR) Brass

Size: 15mm x 15mm x 1/2″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

BRASS WALLPLATE T-ELBOW (C X C X FI) – 15mm x 15mm x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution. Comes with a built-in Wall plate for attaching onto walls.

Model No: DZR-008B

Input / Output type: C x MI

Material: Dezincification Resistant (DR) Brass

Size: 15mm x 3/4″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

 ###This Product sells in a pair (2pc per packet) only###

Description

BRASS WALLPLATE ELBOW [PC] (C X MI) – 15mm x 3/4″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution. Comes with a built-in Wall plate for attaching onto walls. The exterior body is chrome plated for aesthetic appeal purposes.

Model No: DZR-0022A

Input / Output type: C x MI

Material: Dezincification Resistant (DR) Brass

Size: 15mm x 1/2″

Certification: BS EN 1254-2 and 4

*The product is approved by PUB and meets its water regulation requirements*

Description

ANGLE TYPE MINI BALL VALVE [PC]  – 15mm x 1/2″ is commonly known as copper fittings or standard compression fittings, it comes in a wide variety of sizes and connection types in which consumers can configure to suit their requirement. The product is manufactured in accordance with BS EN 1254-2 and 4 and meets Singapore PUB Water Regulation Requirement. The product is especially desirable in retrofit plumbing works where the use of heat is avoided.It is also suitable for connecting different types of tube including copper / stainless steel tubing, in domestic and commercial applications such as plumbing, heating and gas distribution. Comes with a built-in Wall plate for attaching onto walls. The exterior body is chrome plated for aesthetic appeal purposes.